Bars

Items 1 to 10 of 57 total

List Grid

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Olympic Bar Holder

    Olympic Bar Holder

    Please call for pricing.
    Store six Olympic bars upright in an 18″ x 22″ footprint. Maximum storage in minimized footprint.
  2. Legend Fitness Bearing Bar

    Legend Fitness Bearing Bar

    Please call for pricing.
    Is a reasonably priced, American-made bar with 10 bearings even possible? In the new Legend Bearing Bar it is. All the spin and quality you need without a price that will break your budget. Manufactured to Legend specifications, this bar is 100% made in the USA from turned, ground and polished steel. Featuring Olympic marks only with light knurling (but no center knurling) and bright zinc plating, this bar provides the right amount of grip and hand placement information for explosive lifts. The ten needle bearings are packed with quality lubrication, but once that loosens up a bit, they will spin and spin and spin! Sleeves are zinc plated, with 16.25-inch load length and a beveled 1.25-inch thick collar. Also, if ever the bearings should need servicing, this bar breaks down in the field without the need for a vice or special tools, so you can extend the service life of this bar until it becomes an heirloom.
  3. Legend Fitness Power Bar

    Legend Fitness Power Bar

    Please call for pricing.
    Finally, bars worthy of the Legend name. Machined, tested and manufactured in the USA. Excellent strength and whip characteristics coupled with high-quality bushings and thoughtful details make this a bar for discerning athletes. Both bar and sleeves on this model feature a bright zinc finish. The bar itself has a medium-rise knurl that’s not too sharp, not too flat. Each sleeve features long 16.5-inch plate load areas; a beveled, one-inch-thick collar; and dual Oilite bushings that provide a good amount of spin. There’s a moderate amount of whip for Olympic movements, and carefully selected alloys have resulted in a bar with an impressive tensile strength of 190,000 pounds and a yield strength of 175,000 pounds while maintaining a very competitive price.
  4. Legend Fitness Olympic Bar

    Legend Fitness Olympic Bar

    Please call for pricing.
    Finally, bars worthy of the Legend name. Machined, tested and manufactured in the USA. Great strength, sleeve spin and whip characteristics coupled with high-quality construction make this one of the best values on the market for an Olympic barbell. This model features black zinc-plated sleeves and a bright zinc-plated bar. The knurl has a low rise for those who don’t care for the sharp stuff. Each sleeve features long 16.5-inch load areas, a one-inch-thick collar and dual Oilite bushings that provide the right amount of spin. This bar exhibits a medium amount of whip during Olympic movements, and carefully selected alloys have resulted in a bar with an impressive tensile strength of 190,000 pounds and a yield strength of 175,000 pounds while maintaining a very competitive price.
  5. Olympic Bar Jack

    Olympic Bar Jack

    Please call for pricing.
    Only two frame bolts, otherwise fully welded. Rubber-coated handle. Durable ABS polymer protects bar knurling.
  6. Fusion 5 Half Cage Module w/Skinny Bar

    Fusion 5 Half Cage Module w/Skinny Bar

    Please call for pricing.
    Convert your Pro Series Modular Half cage to a double-sided half cage, or make your Pro Series Modular Power Cage into a triple cage with this Fusion 5 module. Either way, adding the Fusion 5 Half Cage Module w/Skinny Bar to one of the Legend Fitness Pro Series Modular Series cages adds the ability for an additional athlete to train in the same space, without being in the way. The skinny bar measures 1/375″ and is great for pull up exercises. This version of the Fusion 5 module must be used if connecting multiple cages back-to-back. The skinny bar crossmember can be moved to the back of the module to allow for a custom nameplate crossmember to be shown, as pictured. Available in all of our standard powder coat colors. Also available as a multi-grip pull up bar version (3268-F52).
  7. Fusion 5 Half Cage Module w/Multi-Grip Pull Up Bar

    Fusion 5 Half Cage Module w/Multi-Grip Pull Up Bar

    Please call for pricing.
    Convert your Pro Series Modular Half cage to a double-sided half cage, or make your Pro Series Modular Power Cage into a triple cage with this Fusion 5 module. Either way, adding the Fusion 5 Half Cage Module w/Multi-Grip Pull Up Bar to one of the Legend Fitness Pro Series Modular Series cages adds the ability for an additional athlete to train in the same space, without being in the way. Crossmember has pull-up stations with a “floating” angled wide grip pull up bar on one side and neutral grip rods on the other, both equipped with foam rubber grips. Available in all of our standard powder coat colors. Also available as a skinny bar version (3268-F51), which must be used if connecting multiple cages back-to-back.
  8. DYNAMIC BADGER BAR

    DYNAMIC BADGER BAR

    Please call for pricing.
    The Dynamic Badger Bar represents the highest level of precision engineering with a wide range of new features.
  9. DYNAMIC MEN'S OLY BAR

    DYNAMIC MEN'S OLY BAR

    Please call for pricing.
    The Dynamic Men's Oly Bar represents the highest level of precision engineering with a wide range of new features.
  10. DYNAMIC TECHNIQUE BAR

    DYNAMIC TECHNIQUE BAR

    Please call for pricing.
    The Dynamic Technique Bar represents the highest level of precision engineering with a wide range of new features.

Items 1 to 10 of 57 total

List Grid

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5